Welcome to PMC Corporation

PRODUCT CODE: RBS/RBS

The temperature measurement industry has grown to expect only the highest quality products from PMC A Division of R-SCC.

PMC SURVEY WIRE is designed specifically to meet the demands inherent in the performance of an oven survey for load thermocouples as well as other heat treat application. This construction is designed to withstand continuous temperatures as high as1400°F (760°C) with excursions to 1600°F (872°C).

This FILAFLEX® insulated SURVEY WIRE design consists of single conductors insulated with high tensile strength, low alkali magnesia alumina silicate vitreous fiber braid. Once this material has been braided onto the wire it is impregnated with a proprietary binder to improve moisture and abrasion resistance as well as enhanced "pushed back" characteristics. The singles are then laid parallel and a braided jacket of the same high temperature fiber is applied. The jacket is then impregnated with a proprietary saturant to inhibit fraying.

This special construction allows ease of cutting, junctioning and other typical handling problems associated with soft thermocouple wire insulations.

You will find our qualified sales and engineering staff eager to assist in selecting a design to meet the requirements of your specific application.

Variations of this construction are available upon request including protective metal coverings for improved abrasion resistance.

Pricing Policy:	Shipments will be invoiced at PMC's prices in effect at time of shipment. Quotations are given with an escalation clause and prices, terms, and conditions are subject to change without prior notice. PMC will however, make every attempt to hold to current quoted prices. All prices are in United States currency, and shall be subject to correction for errors, unless otherwise stated in writing to PMC.
Reels, Spools & Coils:	All shipments, unless specified otherwise by PMC, are make on non-returnable reels, spools or coils in one continuous length.
Shortages & Returns:	All claims for shortage or incorrect material must be made within 10 days after receipt of the goods to which such claim pertains. Goods may only be returned for credit within 1 month of the date of authorization. Goods that are special in any way shall not be returned to PMC. Material returned for any reason, without written authorization will be refused a n returned at shipper's expense. A return request must be processed through our Manchester, N.H. sales office.
Tolerances:	Due to allowances in manufacturing processes for wire, cable and similar products, PMC-A Division of R-SCC reserves the right to ship variation of ± 10% from the quantity of such goods ordered. Physical tolerances shown are nominal. Shipping weights are an average of all types of conductors and are listed for estimation only. These weights can vary substantially due to different types of spools, reels and/or conductors. The material contained in the document is presented in good faith and believed to be reliable and accurate. However, because testing conditions may vary and material quality or information that may be provided in whole or part by others may be beyond our control, no warranty, expressed or implied, is given PMC-A Division of R-SCC can assume no liability for results obtained or damages incurred through the application of the data tests presented. Note: PMC-A Division of R-SCC reserves the right to substitute an equal product on all registered trademark items.

Build your own Part Number